This pump goes above and beyond the ISO 2858 benchmark. Thanks to its refined hydraulic engineering, it achieves superior efficiency with lower power consumption—meaning you get more performance for less energy cost. In fact, it delivers 1.6× the flow and 1.25× the head compared to standard ISO 2858 pumps of the same size, giving you a significant performance edge without upsizing your equipment.
产品系列 :
EH Series适用标准 :
ISO2858 Standard容量 :
4~1000m3/h头部 :
2~160m入口和出口直径： :
32~200mm转速（转/分钟） :
1450rpm / 2900rpm (50Hz); 1750rpm / 3500rpm (60Hz)最大工作压力 :
1.6MPa (standard) ; 2.4MPa(on special request)温度 :
-15~80℃(standard) ; 80~120℃(on special request)Eifel High-Efficiency End Suction Centrifugal Water Pump
Performance customization is achieved through impeller diameter trimming. The range is built around four shaft sizes and four bearing housing variants, allowing pumps with identical casings to share key components including shafts, seal assemblies, and impeller mounting hardware—significantly reducing spare parts inventory and simplifying maintenance.
Model Instruction
Highlights
The pumps deliver 1.6 times the flow and 1.25 times the head compared to the matching sizes in ISO 2858.
Material
| Pump Part | Material |
| Casing | Cast Iron |
| Ductile Iron | |
| Impeller | Cast Iron |
| Brass | |
| Bronze | |
| Stainless Steel | |
| Shaft | Carbon Steel |
| Stainless Steel |
Applications
Operating Data
| Design | performance and dimensions referring to the European standard BS EN733 / DIN24255 |
| Structure | horizontal, axial end-suction, single stage, single -suction, volute casing, back pull-out |
| DN(mm) | 50 |
| Flange | DIN2501 PN16 GB/T17241.6 PN1.6 (ANSI, JIS, AS...) |
| Flow Rate(Q) | 6.9~17.3m3/h |
| Head(H) | 5.1~11m |
| Speed | 1450rpm (50Hz) |
| Max. Temperature | 85℃(standard); 120℃(on request) |
| Working Pressure | 1.0MPa standard; 1.6MPa on request |
| Conveying Medium | clean water or liquids similar to clean water in physical property |
Field Charts
This pump goes above and beyond the ISO 2858 benchmark. Thanks to its refined hydraulic engineering, it achieves superior efficiency with lower power consumption—meaning you get more performance for less energy cost. In fact, it delivers 1.6× the flow and 1.25× the head compared to standard ISO 2858 pumps of the same size, giving you a significant performance edge without upsizing your equipment.
阅读更多
该泵的设计符合 ISO 2858 标准，但其性能甚至优于 ISO 2858 标准。该泵采用卓越的水力设计，从而在降低能耗的同时显著提高效率。其流量是 ISO 2858 标准中相应尺寸泵的 1.6 倍，扬程是其 1.25 倍。
阅读更多
留言
扫描至微信/WhatsApp :
English
Русский
Español
عربي
中文
IPv6 网络支持